User Manual EtherNet/IP Master/ CAN
Document code: MN67645_ENG
Revision 1.000
Page 12 of 27
Industrial Electronic Devices
USE OF COMPOSITOR SW67645:
To configure the Converter, use the available software that runs with Windows called SW67645. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67645, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67645
ADFweb.com S.r.l.