Hartmann Veroval DUO CONTROL Instructions For Use Manual page 30

English
EN
Error
Implausible
measured values
IFU_Veroval_dc_SK2_0307661_EN_TR_AE_CN_200918.indd 30
Possible causes
Air is released too fast or too
slow during the measuring
procedure.
The cuff could have become
detached or loosened.
Movement during the
measuring procedure could also
be the reason.
Error during air release or
unusual pressure reduction.
Air tube is not correctly inserted
into the device or is kinked.
The inflation pressure is higher
than 300 mmHg.
The pressure is released
automatically.
If the battery symbol is
flashing, the batteries are
almost empty. Only a few more
measurements are possible.
If the battery symbol is
permanently displayed, the
batteries are empty and have to
be replaced.
Implausible measured
values often occur due to
inappropriate handling of
the device or if there are
mistakes during the measuring
procedure.
30
Remedy
Check whether the cuff has
been positioned correctly.
Do not move during the
measurement.
Check that the connector is
correctly fitted and for kinks in
the air tube.
Repeat the measurement after
at least 1 minute of rest.
Have new batteries of the same
type ready (AA /LR06).
Insert new batteries of the
same type (AA/LR06). Then
check the date/time and, if
necessary, reset them (see
Chapter 4).
Please note the 10 golden
rules for blood pressure
measurement (see Chapter 5.1)
as well as all the important
instructions in Chapter 2.
Then repeat the measurement.
If implausible values still occur:
please contact your doctor!
17.10.18 18:04