Expansion Modules - H3C S5560S-EI Series Installation Manual

Power supply
PSR1110-56A
NOTE:
The PSR1110-56A power supply adds 64 mm (2.52 in) to the total depth of the switch, which
includes the power supply handle.

Expansion modules

Table3-4 Expansion modules
Model
LSWM2SP2PB
IMPORTANT:
By default, the operating mode is 0 for the expansion module on an S5130S-28C-HI or
S5130S-28C-PWR-HI switch. In this mode, ports 26 and 28 on the front panel are available, and
none of the ports on the expansion module is available. To use ports on the expansion module,
execute the
reboot the switch. After the configuration, ports 26 and 28 on the front panel become unavailable.
For more information, see the Layer 2—LAN switching configuration guide of the device.
Specifications
@ 50 Hz or 60 Hz
•
Max input voltage range: 90 VAC to 264 VAC @
47 Hz to 63 Hz
•
Max output power: 720 W
•
Rated input voltage range: 115 VAC to 240 VAC
@ 50 Hz or 60 Hz
•
Max input voltage range: 102.5 VAC to 264 VAC
@ 47 Hz to 63 Hz
•
Max output power: 1110 W
Description
2-port 10-Gigabit
SPF+ fiber Ethernet
interface module
port-configuration-mode
Port Available transceiver
quantity modules and cables
•
10-GE SFP+ module
•
10-GE SFP+ cable
2
•
GE SFP module
•
GE SFP cable
command to set the operating mode to 1 and then
3-33
Reference
Module User Manual
H3C PSR1110-56A Power
Module User Manual
Reference
H3C LSWM2SP2PB
& LSWM2SP4PB
Interface Cards User
Manual.