Planning Irf Fabric Setup; Planning Irf Fabric Size And The Installation Site; Identifying The Master Switch And Planning Irf Member Ids; Planning Irf Topology And Connections - H3C S5560S-EI Series Installation Manual

Step
2. Install IRF member
switches
3. Connect ground wires and
power cords
4. Power on the switches
5. Configure basic IRF
settings
6. Connect the IRF physical
ports

Planning IRF fabric setup

This section describes issues that an IRF fabric setup plan must cover.

Planning IRF fabric size and the installation site

Choose switch models and identify the number of required IRF member switches, depending on the
user density and upstream bandwidth requirements. The switching capacity of an IRF fabric equals
the total switching capacities of all member switches.
Plan the installation site depending on your network solution, as follows:
•
Place all IRF member switches in one rack for centralized high-density access.
•
Distribute the IRF member switches in different racks to implement the ToR access solution for
a data center.
NOTE:
For the maximum IRF member devices supported by the switch, see the release notes that come
with the switch.

Identifying the master switch and planning IRF member IDs

Determine which switch you want to use as the master for managing all member switches in the IRF
fabric.
An IRF fabric has only one master switch. You configure and manage all member switches in the IRF
fabric at the CLI of the master switch. IRF member switches automatically elect a master.
You can affect the election result by assigning a high member priority to the intended master switch.
For more information about master election, see the IRF configuration guide or virtual technologies
configuration guide for the switch series, depending on the software version.
Prepare an IRF member ID assignment scheme. An IRF fabric uses member IDs to uniquely identify
and manage its members, and you must assign each IRF member switch a unique member ID.

Planning IRF topology and connections

You can create an IRF fabric in daisy chain topology or more reliable ring topology. In ring topology,
the failure of one IRF link does not cause the IRF fabric to split as in daisy chain topology. Instead,
the IRF fabric changes to a daisy chain topology without interrupting network services.
Description
See "Installing the switch in a 19-inch
workbench."
See "Grounding the switch" and
N/A
See the IRF configuration guide or virtual technologies configuration
guide for the switch series, depending on the software version.
Connect IRF physical ports on switches.
All switches except the master switch automatically reboot, and the IRF
fabric is established.
4-37
rack" or "Mounting the switch on a
"Connecting the power cord."