S5130S-28S-Upwr-Hi - H3C S5560S-EI Series Installation Manual

S5130S-28S-UPWR-HI

Figure2-27 Front panel
1
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port LED
(3) Management Ethernet port LED (ACT/LINK)
(5) Console port (CONSOLE)
(7) Port LED mode switching button
(9) USB port
(11) Power supply 2 status LED (PWR2)
(13) SFP+ port
Figure2-28 Rear panel
1
(1) Grounding screw
(3) Power supply 2
The S5130S-28S-UPWR-HI switch comes with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
this figure, two PSR720-56A AC power supplies are installed in the power supply slots.
2 3 4 5 6 7
8
14 13 12 11 10
(4) Management Ethernet port
(6) Micro USB console port
(8) Mode LED (MODE)
(10) System status LED (SYS)
(12) Power supply 1 status LED (PWR1)
(14) SFP+ port LED
(2) Power supply 1
2-27
9
2
3