S5130S-52S-PWR-HI
Figure2-29 Front panel
2
1
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port LED
(3) Management Ethernet port
(5) Micro USB console port
(7) Mode LED (MODE)
(9) System status LED (SYS)
(11) Power supply 2 status LED (PWR2)
(13) Management Ethernet port LED (ACT/LINK)
Figure2-30 Rear panel
1
(1) Grounding screw
(3) Power supply 2
The S5130S-52S-PWR-HI switch comes with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
this figure, two PSR720-56A AC power supplies are installed in the power supply slots.
(4) Console port (CONSOLE)
(6) Port LED mode switching button
(8) USB port
(10) SFP+ port
(12) Power supply 1 status LED (PWR1)
(14) SFP+ port LED
(2) Power supply 1
2-28
3
4
5
14
13
12
11
10
2
3
6
8
7
9