Setting Up An Irf Fabric; Irf Fabric Setup Flowchart - H3C S5560S-EI Series Installation Manual

4

Setting up an IRF fabric

You can use H3C IRF technology to connect and virtualize switches into a large virtual switch called
an "IRF fabric" for flattened network topology, and high availability, scalability, and manageability.
Only switches of the same series support IRF connection.

IRF fabric setup flowchart

Figure 4-1 IRF fabric setup flowchart
Start
Plan IRF fabric setup
Install IRF member switches
Connect the grounding cable
and power cords
Power on the switches
Configure basic IRF settings
Connect the physical IRF ports
Standby switches reboot and
the IRF fabric is automatically
established
End
To set up an IRF fabric:
Step
1. Plan IRF fabric setup
Description
Plan the installation site and IRF fabric setup parameters:
•
Planning IRF fabric size and the installation site
•
Identifying the master switch and planning IRF member IDs
•
Planning IRF topology and connections
•
Identifying IRF physical ports on the member switches
•
Planning the cabling scheme
4-36