S5130S-52C-Hi - H3C S5560S-EI Series Installation Manual

S5130S-52C-HI

Figure2-21 Front panel
1
2
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port LED
(3) Management Ethernet port
(5) Micro USB console port
(7) Mode LED (MODE)
(9) System status LED (SYS)
(11) SFP+ port LED
(13) Power supply 2 status LED (PWR2)
(15) SFP port
(17) SFP port LED
Figure2-22 Rear panel
1
(1) Grounding screw
(3) Power supply 1 (PWR1)
The S5130S-52C-HI switch comes with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In this figure,
two PSR75-12A AC power supplies are installed in the power supply slots.
The S5130S-52C-HI switch provides an expansion slot at the rear panel. It comes with this
expansion slot installed with a filler panel. You can install one expansion module as needed. In this
figure, an LSWM2SP2PB interface module is installed.
2
2-24
(4) Console port (CONSOLE)
(6) Port LED mode switching button
(8) USB port
(10) SFP+ port
(12) Expansion slot LED (SLOT)
(14) Power supply 1 status LED (PWR1)
(16) Management Ethernet port LED (ACT/LINK)
3
(2) Expansion module
(4) Power supply 2 (PWR2)
8
3 4 5 6
7
9
15 12
17 16 13 11 10
14
4