S5130S-28S-Pwr-Hi - H3C S5560S-EI Series Installation Manual

S5130S-28S-PWR-HI

Figure2-25 Front panel
1 2
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port LED
(3) SFP port
(5) Management Ethernet port
(7) Micro USB console port
(9) Mode LED (MODE)
(11) System status LED (SYS)
(13) Power supply 2 status LED (PWR2)
(15) Management Ethernet port LED (ACT/LINK)
Figure2-26 Rear panel
1
(1) Grounding screw
(3) Power supply 2
The S5130S-28S-PWR-HI switch comes with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
this figure, two PSR720-56A AC power supplies are installed in the power supply slots.
8
3 4 5 6 7
9
16 15 14 13 12
(4) SFP port LED
(6) Console port (CONSOLE)
(8) Port LED mode switching button
(10) USB port
(12) SFP+ port
(14) Power supply 1 status LED (PWR1)
(16) SFP+ port LED
(2) Power supply 1
2-26
10
11
2
3