System Integration; Commissioning; Function Check; Switching On The Measuring Device - Endress+Hauser HART Flowmeter Proline 400 Brief Operating Instructions

Flowmeter Proline 400
7

System integration

For detailed information on system integration, see the Operating Instructions for the
device →  3
• Overview of device description files:
• Current version data for the device
• Operating tools
• Measured variables via HART protocol
• Burst mode functionality in accordance with HART 7 Specification
8

Commissioning

8.1

Function check

Before commissioning the measuring device:
‣
Make sure that the post-installation and post-connection checks have been performed.
• "Post-installation check" checklist →  18
• "Post-connection check" checklist →  40
8.2

Switching on the measuring device

‣
After a successful function check, switch on the measuring device.
 After a successful startup, the local display switches automatically from the startup
display to the operational display.
If nothing appears on the local display or a diagnostic message is displayed, refer to the
Operating Instructions for the device →  3
8.3

Setting the operating language

Factory setting: English or ordered local language
Endress+Hauser
System integration
49