Table of Contents
Advertisement
Installation
4.3
Purging the cylinders
Purge the lift cylinders by lowering the platform all the way to the ground a few times. It may be necessary to
raise the truck to allow the platform to be lowered completely.
Purge the tilt cylinders by tilting the platform all the way up to the vehicle body and then all the way down.
4.4
Open platform alarm
When installing tail lifts on the trailer, it is recommended a main power switch be installed on the main power
cable. This may be in the form of warning lights fitted on the outside of the body, visible in the rear-view
mirror from the driver's cab, or another solution that works in a similar way. Connection is described later in
section 6.
www.zepro.com
Z/ZL 1500/2000-135/155/175
27
Hide quick links:
Advertisement
Table of Contents
