Install Right Axle Bushing - Ariens Sno-Thro Deluxe Series Service Manual

Install Right Axle Bushing

1. Secure bushing to frame exterior with three tapping
screws from inside frame. See Figure 94.
See Figure 95.
2. Reinstall short axle until a small portion of axle is
through frame.
3. Reinstall two flat steel washers onto axle inside of
frame.
Figure 94
Figure 95
See Figure 96.
4. Align differential gear with pinion gear and short axle.
Fully insert short axle into differential gear.
5. Reinstall outer flat steel washer on short axle.
See Figure 97.
6. Reinstall long axle through frame and fully through
differential gear and short axle.
7. Reinstall E-ring onto long axle end.
8. Reinstall left flat steel washer onto long axle.
9. Reinstall bottom cover and secure with two tapping
screws and four hex bolts.
10. Ensure axle keys are in position and reinstall wheels.
Secure with snap clips.
11. Return unit to operating position.
12. Reconnect spark plug wire and fill fuel tank.
EN – 43
Figure 96
Figure 97