Table of Contents
Advertisement
2
1. Upper Jam Nut
2. Lower Jam Nut
Figure 46
REMOVE AND INSTALL MOWER
DECK
Remove Deck
1. Place unit in service position. See
Service Position on page 16.
2. Set deck to lowest cutting height.
3. Position supports, such as wood blocks,
under mower deck.
4. Remove PTO belt. See Remove PTO
Belt on page 27.
5. Slowly disconnect lift-assist springs from
spring peg on each side of deck. See
Figure 47.
1. Lift-Assist Spring
2. Spring Peg
Figure 47
1
2
1
EN - 32
6. Remove hardware retaining drag links to
frame. See Figure 48.
Figure 48
7. Remove hardware retaining deck lift links
to deck lift brackets. See Figure 49.
Figure 49
8. Remove deck from under unit.
Advertisement
Table of Contents
