Drive Idler Assembly Replacement; Remove Attachment Drive Idler Assembly; Remove Traction Drive Idler Assembly - Ariens Sno-Thro Deluxe Series Service Manual

DRIVE IDLER ASSEMBLY
REPLACEMENT

Remove Attachment Drive Idler Assembly

IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire.
3. Remove auger housing. See Separate Housing From
Frame on page 7.
4. Disconnect attachment brake spring from frame. See
Figure 22.
Figure 22
See Figure 23.
5. Disconnect torsion spring from attachment idler arm.
6. Remove tapping screws retaining attachment idler
arm to hub and remove idler assembly.
1. Torsion Spring

Remove Traction Drive Idler Assembly

IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire.
3. Remove attachment drive idler assembly. See
Remove Attachment Drive Idler Assembly on page 15.
EN – 15
1
Figure 23