Install Engine - Ariens Sno-Thro Deluxe Series Service Manual

See Figure 73.
11. Remove hardware securing attachment sheave to
crankshaft.
12. Remove attachment sheave and traction sheave from
crankshaft.
Figure 73

Install Engine

1. Using a suitable lifting device or help from a capable
Type 1
assistant, lift engine and lower onto bolts in frame.
2. Position belts over crankshaft.
3. Reinstall J-clamp to left rear engine mounting position.
See Figure 72.
4. Secure engine mount to frame with four locking nuts.
Torque to 11.9 N•m – 17.9 N•m (8.8 lb-ft – 13.2 lb-ft).
Type 2
EN – 33
WARNING: AVOID INJURY. Engine is heavy.
NEVER lift engine without a suitable lifting device
or capable assistant.