Assemble Gearcase - Ariens Sno-Thro Deluxe Series Service Manual

14. Remove seals and flange bushings from gearcase.
See Figure 133.
Figure 133

Assemble Gearcase

See Figure 134.
1. Press rear seal into gearcase until flush with gearcase
exterior.
IMPORTANT: DO NOT press left seal into gearcase.
2. Reinstall left and rear flange bushings.
1
1. Seal
2. Flange Bushing
See Figure 135.
IMPORTANT: Gear is symmetrical and may be installed
facing either direction.
3. Install gear.
EN – 56
2
2
Figure 134
Figure 135