Install The Control; Install Auxiliary Mounting Pad - Danfoss 45 K2 Series Repair Instructions

Repair Instructions
Series 45 Frame K2 Axial Piston Pumps
Reassembly

Install the control

Install auxiliary mounting pad

34 | © Danfoss | April 2017
Item Description
QC125 Coil plastic nut
C300 Screws
1. Using petroleum jelly to retain them, install 4 new seal rings (C200) in the recesses on the control
housing.
2. Install the control assembly onto the endcap using the 4 screws (C300). Torque at 5.4 to 7.5 N•m [4.0
to 5.5 lbf•ft] using a criss cross pattern and retorque the first screw to ensure proper torque retention.
Install the control
C200
1. Install the adapter (J080) with new O-rings (J090, J095). Tighten the screws (J100) at 47.5 to 61 N•m
[35 to 45 lbf•ft].
2. Install the coupling (J140) onto the shaft.
Wrench size
26 mm 12 pt socket
4 mm internal hex
C300
P109056
Torque
3.5 N•m [2 lbf•ft]
6.5 N•m [4.75 lbf•ft]
AX00000305en-US0101