Connecting The Speakers And Antennas; Usb Extension Cable; Dab Wire Antenna - Sony Giga Juke NAS-S55HDE Operating Instructions Manual

Connecting the speakers and antennas

NETWORK port
Use to connect the unit to a network. For details on network
connections, see page 79.
Make sure the metal leads (not the part covered with
vinyl insulation) are securely inserted into the speaker
terminals.
Insert the end of the cord marked with a red line into
the + terminal and the cord with no marking into the
– terminal.
USB port
Use to connect a USB storage device, another portable
device, or the supplied wireless adaptor with the USB
extension cable.
DAB wire antenna (UK model only)
With a DAB external antenna, you can obtain a higher DAB
broadcast sound quality. It is recommended that you use the
supplied DAB wire antenna for only temporarily until you
install a DAB external antenna (optional).
75 coaxial cable with F male type connector will be needed

to install the DAB external antenna (optional).
DAB wire
antenna
0
GB
MONITOR OUT (NTSC) jack
Use to connect a TV. See page 22 for details.
FM wire antenna
Use a commercially available 75
coaxial cable to connect the unit to
an external antenna.
External antenna
