Table of Contents
Advertisement
Chapter 1:
Connecting the Stereo
inserting the Batteries
Setting the Clock
A | Chapter 1: Setting up
ES
ee
eee
Connecting the Stereo
Use the illustrations below to connect your
stereo. MHC-550 is the model used for the
whole illustration of the stereo.
STEP 1 | Connecting the
Speakers
1 Twist the speaker cable coating and strip
it from the end of the cable.
—rn
2 Connect the right speaker to R
connectors and the left speaker to L
connectors.
When you attach the speakers to the
unit (for FH-B511 only)
Slide the speaker box so that it locks onto
the body of the unit.
| STEP 2 | Connecting the
Antennas
FM lead antenna (supplied
for MHC-5S50)*
AM loop antenna (supplied)
*Note: Extend it horizontally
To improve the FM reception
Connect an outdoor FM antenna to the FM
75Q and +h terminals, using a 75-ohm
coaxial cable.
75-ohm coaxial cable
(not supplied)
To improve the AM reception
After you connect the AM antenna, connect
a 6 to 15-meter (20- to 50- feet) insulated
wire to the AM terminal. Connect the +
terminal to earth.
important
Ground the external antenna against
lightning. To prevent from gas explosion,
do not connect the ground wire to a gas
pipe.
Insulated wires
(not supplied)
Advertisement
Table of Contents
