Table of Contents
Advertisement
The unit cannot find an access point.
Use a USB extension cable to move the
wireless adaptor to a location with better
reception.
Home Network
When the unit is used as a client
You cannot connect to the server (an error
message appears).
Make sure the network cable is connected.
If a hub or a router with a built-in hub is being
used, make sure that it is turned on.
Make sure the server is turned on.
Make sure that the IP address of this unit is
correctly obtained.
If [DHCP] is set to [All auto] and the IP
address is obtained correctly, the IP address
will appear in the display (page 82). If the IP
address does not appear, check the following
items.
Make sure the hub or broadband router is
turned on. (Refer to the operating manuals
supplied with the equipments being used.)
Make sure the broadband router is turned
on before you turn on the unit.
Make sure network cables are being used to
connect the unit, hub, or broadband router
(pages 74, 75 and 79).
Make sure that the method of obtaining
the IP address is correct for your network
environment (page 81).
Check that the initial settings for the server
have been correctly made.
If the ICF (Internet Connection Firewall)
function is active in the server, this may
prevent the unit from connecting to the server.
In this case, deactivate the ICF function.
11
GB
Make sure the registration of the unit has been
correctly made on the server side.
Even if you erase the registration of the unit
from the server, the server may appear in the
selectable server list of this unit.
Register the unit in the server again.
If you cannot connect the unit to the server
using the HOME NETWORK function even
if all settings have been correctly made, restart
the server.
Enter the Options menu and select [Display]
– [Update info]. It may take a while before the
server appears in the display.
The unit does not connect automatically to
the server.
If the unit is directly connected to the server
with a cross cable, the unit may not be able to
connect to the server. Make sure the unit is
connected to the server through a hub.
The unit cannot be registered to a VAIO
computer.
Make sure the network connection is correctly
made and check the following items.
Make sure if the check mark on "Release
confirmation number" is deleted.
Make sure if the hub or broadband router is
turned on. (Refer to the operating manuals
supplied with the equipments being used.)
Make sure the broadband router is turned
on before you turn on the unit.
Make sure network cables are being used to
connect the unit, hub, or broadband router
(pages 74, 75 and 79).
Make sure that the method for obtaining
IP address is correct for your network
environment (page 81).
Hide quick links:
Advertisement
Table of Contents
