Changing the unit's settings
Setting the display
/ / / /
ENTER
To change the display size on the unit
You can select two display sizes.
1
Enter the Settings menu and select
[System setting].
The setting display appears.
2
Select [Unit display].
3
Select [Wide zoom (16:9)] or [Normal
(4:3)].
4
Select [Close].
Note
Changing the screen size on the unit does not affect the
image output from the MONITOR OUT jack.
To set the screen saver
As in the case of a personal computer, you can set
a screen saver that will appear when no operation
is done for a while.
1
Enter the Settings menu and select
[System setting].
The setting display appears.
2
Select [Screen saver].
3
Select [On].
On
Off
(
: Factory setting)
4
Select [Close].
SETTINGS
If no operation is done for
15 minutes, the screen saver
activates.
The screen saver does not
activate.
To change the display design
You can select the display design on the unit.
1
Enter the Settings menu and select
[Screen setting].
2
Select [Select design].
3
Select [Type 1] or [Type 2].
4
Select [Execute].
The display changes to the design you selected.
101
GB