Connections And Settings; Connecting The Speakers And Antennas - Sony Giga Juke NAS-50HDE Operating Instructions Manual

Connections and
Settings

Connecting the speakers and antennas

Connect the supplied speakers, antennas and power cord in order of  to  in the figure.
The supplied antennas are designed for use within the home. For stable reception, it is
recommended that you connect the unit to an external antenna (separately purchased). For
details on connection to portable devices or optional components, see pages 26 and 50.
 Connect the speaker cords to the
speakers.
Insert the cords into the speaker terminals
on the speakers.
Pull on the cord lightly afterwards
to confirm that the cords are firmly
connected.
Red
Black
Black
0
GB
UK model only
Red
AUDIO IN jack
Use to connect an optional audio component
(such as a cassette deck) through an audio
connecting cord (optional). Analog sound
input through this jack can be played or
recorded on the unit.
AUDIO OUT jack
Use to connect an optional audio component
(such as a cassette deck) through an audio
connecting cord (optional). Analog sound is
output through this jack to the connected
component
MONITOR OUT (NTSC) jack
Use to connect a TV or other device through an optional video
cable. A video signal is output through this jack for display on
the connected device.
Note
Make sure the metal leads (not the part covered
with vinyl insulation) are securely inserted into
the speaker terminals.