Table of Contents
Advertisement
The server you want to connect does not
appear in the selectable server list display.
Enter the Options menu and select [Display]
– [Update info]. It may take a while before the
server list is updated.
Make sure that a "music server" (an
application) is active in the connected server.
If you are using VAIO Media, refer to the
VAIO Media help.
It takes a while for the unit to connect to
the server.
If your Internet connection is not through
a broadband router, it may take about 30
seconds after turning on the power for
the unit to obtain an IP address and start
connecting to the server.
The IP address set for the unit is already
being used by other device. Set a different IP
address.
Connection to the server cannot be
achieved or playback is not possible.
If you add a broadband router after using the
unit in the network connection without using
a broadband router, the IP address may be
changed automatically and the connection
with the server may become impossible.
In this case, go to the selectable server list
display and update the setting to obtain a new
IP address. (Refer to "The server you want
to connect does not appear in the selectable
server list display" on this page.)
The sound skips.
Sound skipping may occur depending on the
network environment.
Sound skipping may occur when the server is
running many applications. Close the other
applications on the server.
Sound skipping may be caused by
electromagnetic waves when the unit is
connected to a wireless network.
The audio format that appears on the unit
is different from that on the server.
The audio format for playback via a network is
displayed on the unit. This may differ from the
format displayed on the server.
"Incompatible format found. " appears in the
display and the track cannot be played.
Check to confirm whether the audio file on
the server is damaged or erased. Refer to the
operating manual of the server.
Incompatible-format track is selected.
When the unit is used as a server
The unit cannot be found on the client side
or the client cannot connect to the unit.
Confirm that the network is correctly set. If it
is not, the connection cannot be made.
The server function on the unit may be set to
off. Enter the Settings menu, select [Server
setting], and set [Server function] to [Start] to
start up the server function.
The server has been set to refuse connection
with the client. Confirm whether the client is
registered or not with [Manual setting] in the
server setting menu.
A maximum of 20 connectable clients have
been set. Delete unnecessary clients with
[Manual setting] in the server setting menu.
Depending on the network environment,
automatic connection may not be allowed for
the client. Register the client manually with
[Manual setting] in the server setting menu.
The server function on the unit is suspended
if the unit is conducting one of the following
operations. Reconnect to the clients after the
respective operation has completed.
Recording, importing, editing, manual
analysis of music data for x-DJ, updating
the system application, changing the display
design, transferring audio data to a receiver
system, or converting format.
11
GB
Hide quick links:
Advertisement
Table of Contents
