Connecting External Antennas - Sony MHC-ZX30AV Operating Instructions Manual

?/1
(Power)
Whe n your DV D pla ye r ha s
st e re o a na log out put s
Be sure to match the color of the plugs and the
connectors. Connect the LINE OUT (audio)
output jack of your DVD player to the FRONT
jacks of DVD INPUT with the audio connecting
cable. To listen to the sound from the connected
DVD player, press DVD 5.1 CH repeatedly until
"DVD" appears in the display.
N ot e s
• Each time you press DVD 5.1 CH, the function
changes as follows.
DVD 5.1 CH y DVD (2 channel)
• You cannot enjoy the 5.1 channel surround sound if
you connect a DVD player which does not have the
5.1 channel analog outputs.
• If there is no sound when you connect a DVD
player which has 5.1 channel analog outputs,
connect the LINE OUT (audio) output jacks of your
DVD player to the MD IN jacks, then change the
function to "MD" by pressing FUNCTION.
Downloaded from:
DVD 5.1 CH
https://www.usersmanualguide.com/
Connecting external
antennas
Connect the external antenna to improve the
reception. Refer to the instructions of each
component.
FM antenna
Connect the optional FM external antenna. You
can also use the TV antenna instead.
J a c k t ype A
75-ohm coaxial cable
(not supplied)
J a c k t ype B
IEC standard socket connector
(not supplied)
c ont inue d
51