Sony HCD-CZ1 Service Manual
Sony HCD-CZ1 Service Manual

Sony HCD-CZ1 Service Manual

Network audio system
Hide thumbs Also See for HCD-CZ1:

Advertisement

Quick Links

QQ
3 7 63 1515 0
SERVICE MANUAL
Ver. 1.1 2005.08
• HCD-CZ1 is the amplifier, CD player
and tuner section in NAS-CZ1.
TE
Main unit
L 13942296513
Amplifier section
For the U.S.A. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from
120 – 10,000 Hz; rated 10 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milli watts to
rated output.
European model:
DIN power output (rated): 7.5 + 7.5 watts
Continuous RMS power output (reference):
Inputs
ANALOG IN (mini jack): Sensitivity 450 mV,
Outputs
PHONES (mini jack):
CD player section
System
Laser
www
Frequency response
.
Sony Corporation
9-879-721-02
Audio Group
2005H05-1
Published by Sony Engineering Corporation
© 2005.08
http://www.xiaoyu163.com
HCD-CZ1/NAS-CZ1
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
U.S.A. model:
European models:
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
U.S.A. model:
(6 ohms at 1 kHz, DIN)
10 + 10 watts
(6 ohms at 1 kHz, 10%
European model:
THD)
Antenna
impedance 10 kilohms
Antenna terminals
Intermediate frequency
accepts headphones with
an impedance of 8 ohms or
Speaker section
more
Speaker system
Compact disc and digital
audio system
Semiconductor laser
(λ=770 – 810 nm)
Emission duration:
continuous
2 Hz – 20 kHz (±0.5 dB)
x
ao
y
i
http://www.xiaoyu163.com
8
Model Name Using Similar Mechanism
CD Base Unit Name
Optical Pick-up Block Name
SPECIFICATIONS
Q Q
3
6 7
1 3
87.5 – 108.0 MHz
(100-kHz step)
87.5 – 108.0 MHz
(50-kHz step)
FM lead antenna
75 ohms unbalanced
10.7 MHz
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
AM loop antenna
External antenna terminal
450 kHz
2-way, Acoustic
Suspension type
NETWORK AUDIO SYSTEM
u163
.
2 9
9 4
2 8
AEP Model
Speaker units
1 5
0 5
8
2 9
9 4
Woofer:
Tweeter:
Nominal impedance
General
Power requirements
U.S.A. model:
European model:
Power consumption
U.S.A. model:
European model:
Dimensions (w/h/d) incl. projecting parts and controls
Mass
Supplied accessories
Design and specifications are subject to change
without notice.
m
co
9 9
US Model
UK Model
NEW
BU-K7BD81B
KSM-213EDP
2 8
9 9
9 cm dia., cone type
2.5 cm dia., balanced-
dome-type
6 ohms
120 V AC, 60 Hz
230 V AC, 50/60 Hz
40 watts
40 watts
0.3 watts (in Power Saving
mode)
Approx. 460 × 175 ×
190 mm
Approx. 5.3 kg
Remote Commander with
battery (1)
AM loop antenna (1)
FM lead antenna (1)
Network cable (1)
M-crew Server CD-ROM
(1)

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-CZ1

  • Page 1 3 7 63 1515 0 SERVICE MANUAL US Model AEP Model Ver. 1.1 2005.08 UK Model • HCD-CZ1 is the amplifier, CD player and tuner section in NAS-CZ1. Model Name Using Similar Mechanism CD Base Unit Name BU-K7BD81B Optical Pick-up Block Name...
  • Page 2: Leakage Test

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3: Table Of Contents

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 TABLE OF CONTENTS 1. SERVICE NOTE 7. EXPLODED VIEWS ..............4 7-1. Speaker Grill, Top Panel Section ........54 2. GENERAL 7-2. Front Panel Section ............55 ................15 7-3. Rear Panel Section ............56 7-4.
  • Page 4: Service Note

    HCD-CZ1/NAS-CZ1 SECTION 1 SERVICING NOTES 3 7 63 1515 0 NOTES ON LASER DIODE EMISSION CHECK NOTES ON HANDLING THE OPTICAL PICK-UP The laser beam on this model is concentrated so as to be focused on BLOCK OR BASE UNIT...
  • Page 5 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 NETWORK CHECK 3.1 Errors In The Midway Of Server Connection 1. Apparatuses And Materials Prepared 3.1.1 NETWORK function does not start If the NETWORK function does not start though the [NETWORK] (1) Personal computer with OS “Windows XP” (must satisfy the and USER PROFILE [1] to [5] buttons on the set is pressed.
  • Page 6 3.2.1 “Loading” is displayed for a long time (1) When the set is connected to the M-crew Server for the first time, the M-crew Server identifies the HCD-CZ1 individually and creates the profile information in the personal computer, and therefore it will take time for “Loading”...
  • Page 7: Connecting Power Cord

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 • Operating Instrution for NAS-CZ1 (extract) Checking the network status When selecting the M-crew Connecting power cord Enjoying NETWORK function Server as a media server network lamp The following marks appears in the display.
  • Page 8 Select “MEDIA SERVERS?” in the network • Replace the disc. • The track cannot be played in the following cases: • Consult your nearest Sony dealer if the supplied menu (page 19), then press ENTER. • Place a disc that this system can play.
  • Page 9: System Requirements

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 • Installation Instrution for M-crew Server ver1.1 (extract) s Used Language: English/German/French System Requirements * Operation is guaranteed only with Intel Pentium and Celeron CPUs. The following software and hardware are required in order to be able Notes to run M-crew Server.
  • Page 10: Making The Icf Settings

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Turn on the system. The system is registered automatically After the installation is completed, click [Reboot] to restart your computer. on your computer. To register the system on your computer manually, see “Registering the system on your computer Be sure to restart your computer only after the installation has manually”...
  • Page 11 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Tips Registering the system on your computer • Windows XP and later versions have a simple firewall function as a standard manually feature. This firewall function is called “ICF”, and lets users limit communications between home networks or small-scale office networks and the internet.
  • Page 12: Troubleshooting

    If the problem persists after checking all the below items, fill in the by other software (SonicStage, VAIO Media, etc.). If Open MG SDK is not following table and then consult your nearest Sony dealer. being used, uninstall “OpenMG Limited Patch ***” and “OpenMG Secure In case an error message appears, it is recommended that you write it Module ***”...
  • Page 13 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 6 Select “M-crew Server task tray icon” from the “Programs” list, • The progress bar on the display is not moving. The access lamp has not lit for a few minutes. then click the [OK] button.
  • Page 14 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 CD MECHANISM DECK (BU-K7BD81B) SERVICE POSITION • In checking the CD mechanism deck (BU-K7BD81B), prepare extension jig (Part No. J-2501-248-A: 1mm Pitch, 27 cores, Length 300mm). If operating the CD, solder-bridge the MAIN board (CN603 1pin, 2pin).
  • Page 15: General

    HCD-CZ1/NAS-CZ1 SECTION 2 This section is extracted from instruction manual. GENERAL 3 7 63 1515 0 • Location of controlls Main unit BUTTON DESCRIPTIONS ALPHABETICAL ORDER ?/1 (On/Standby) 1 A – O P – Z Z PUSH OPEN 4 Display window 9 PHONES jack q;...
  • Page 16 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Remote control ALPHABETICAL ORDER BUTTON DESCRIPTIONS ?/1 (On/Standby) 1 A – M N – Z 1/ALL 6 ALBUM +/– 9 NETWORK qa m/M (rewind/fast forward) DISPLAY 2 MENU 7 DSGX qf PRESET EQ 3...
  • Page 17: Disassembly

    HCD-CZ1/NAS-CZ1 SECTION 3 DISASSEMBLY 3 7 63 1515 0 • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. SPEAKER GRILL (F/R) ASSY, TOP PANEL ASSY (Page 18) 3-3. COVER BOTTOM ASSY (Page 18) 3-4.
  • Page 18: Speaker Grill (F/R) Assy, Top Panel Assy

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. SPEAKER GRILL (F/R) ASSY, TOP PANEL ASSY 6 top panel assy 4 speaker grill-R assy 3 six bosses 5 three screws (BVTP 3 × 8)
  • Page 19: Rear Panel Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 3-4. REAR PANEL SECTION 1 five screws 5 two speaker terminals (SP101) (BVTP 3 × 16) 6 rear panel section 2 four screws (BVTP 3 × 8) 4 acoustic absorbent cushion 1 five screws (BVTP 3 ×...
  • Page 20: Front Panel Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 3-5. FRONT PANEL SECTION 5 three speaker terminals (SP102, SP103) 4 FFC 15P (CN601) 3 FFC 13P (CN602) 1 four screws (BVTP 3 × 8) 5 three speaker terminals (SP202, SP203) 6 front panel section L 13942296513 3-6.
  • Page 21: Base Unit (Bu-K7Bd81B)

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 3-7. BASE UNIT (BU-K7BD81B) 7 four claws 8 CD cover 3 two screws 5 two vibration proof rubbers (red) (PTPWH M2.6 × 6) 3 two screws (PTPWH M2.6 × 6) 9 base unit...
  • Page 22: Ether Board, Main Board

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 3-9. ETHER BOARD, MAIN BOARD 1 two screws (BVTP 3 × 6) 5 MAIN board 4 two screws (BVTP 3 × 6) 4 two screws (BVTP 3 × 6) 2 connector (CN501) 3 ETHER board...
  • Page 23: Test Mode

    HCD-CZ1/NAS-CZ1 SECTION 4 TEST MODE 3 7 63 1515 0 FORCED RESET VERSION CHECK MODE * The cold reset clears all data including preset data stored in * This mode is used to check the version of model, destination the RAM to initial conditions.
  • Page 24 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Error detail: CD SERVO TEST MODE 1. Press the button to turn the power on. Digit Contents Value Detail 2. Press the [FUNCTION] button to select “CD” 3. Press three buttons of and 2 simultaneously.
  • Page 25 HCD-CZ1/NAS-CZ1 Ver. 1.1 3 7 63 1515 0 3. bdt RAM WRITE mode Not used in servicing 4. bdt COMOUT mode Not used in servicing 5. bdt ERR RATE mode In bdt ERR RATE mode, N , . and > keys on the main unit don't work as its normally key function.
  • Page 26: Electrical Adjustments

    HCD-CZ1/NAS-CZ1 SECTION 5 ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 Checking Location: CD SECTION – CD BOARD (Conductor Side) – Note: 1. CD Block is basically constructed to operate without adjustment. 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
  • Page 27: Diagrams

    HCD-CZ1/NAS-CZ1 SECTION 6 3 7 6 3 1 5 1 5 0 DIAGRAMS 6-1. BLOCK DIAGRAM – SERVO SECTION – FILTER XTSL CD DSP XTAO IC101 (1/2) X171 CLOCK 51 53 50 52 DETECTOR XTAI D +3.3V 16.9344MHz GENERATOR...
  • Page 28: Block Diagram - Ethernet Section

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 6-2. BLOCK DIAGRAM – ETHERNET SECTION – D/A CONVERTER ETHERNET INTERFACE ETHERNET CONTROLLER IC505 IC501 IC502 E-LOUT TXD0 TXD0 DOUT VOUTL TXD1 TXD1 BCLK 109 BCKIN (Page 29) TXD2...
  • Page 29: Block Diagram - Main Section

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 6-3. BLOCK DIAGRAM – MAIN SECTION – INPUT SELECT, SP101 ELECTRICAL VOLUME (BACK TWEETER) IC701 POWER AMP 14 15 IC201 SP102 L-CH (FRONT TWEETER) J201 +INA OUTA SP103 ANALOG IN...
  • Page 30 HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side.
  • Page 31: Printed Wiring Board - Cd Board

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-4. PRINTED WIRING BOARD – CD BOARD – : Uses unleaded solder. CD BOARD (COMPONENT SIDE) M101 (SPINDLE) CD BOARD (CONDUCTOR SIDE)
  • Page 32: Schematic Diagram - Cd Board

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 45 for Waveforms. • See page 46, 47, 48 for IC Block Diagrams. 6-5. SCHEMATIC DIAGRAM – CD BOARD – C131 100p TP423 IOP1 C142 1500p...
  • Page 33: Printed Wiring Board - Ether Board

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-6. PRINTED WIRING BOARD – ETHER BOARD – : Uses unleaded solder. MAIN BOARD CN651 (Page 36) ETHER BOARD ETHER BOARD...
  • Page 34: Schematic Diagram - Ether Board

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 45 for Waveforms. • See page 49 for IC Block Diagrams. • See page 50 for IC Pin Function Description. 6-7. SCHEMATIC DIAGRAM – ETHER BOARD –...
  • Page 35: Main Board (Component Side)

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-8. PRINTED WIRING BOARD – MAIN BOARD (COMPONENT SIDE) – : Uses unleaded solder. MAIN BOARD (COMPONENT SIDE) 1 3 9 4 2 2 9 6 5 1 3...
  • Page 36: Printed Wiring Board - Main Board (Conductor Side)

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-9. PRINTED WIRING BOARD – MAIN BOARD (CONDUCTOR SIDE) – : Uses unleaded solder. FRONT PANEL FL BOARD PSAMP BOARD BOARD...
  • Page 37: Schematic Diagram - Main Board (1/2)

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 6-10. SCHEMATIC DIAGRAM – MAIN BOARD (1/2) – L751 100µH (1/2) R753 R752 100k IC701 C752 M61529FP-D60G C813 C908 0.047 R903 (Page 38) CN751 C812 9P(US) C913 10 50V...
  • Page 38: Schematic Diagram - Main Board (2/2)

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 45 for Waveforms. • See page 48 for IC Block Diagrams. • See page 52 for IC Pin Function Description. 6-11. SCHEMATIC DIAGRAM – MAIN BOARD (2/2) –...
  • Page 39: Printed Wiring Boards - Power Section

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-12. PRINTED WIRING BOARDS – POWER SECTION – : Uses unleaded solder. R–CH L–CH SP201 SP101 (BACK TWEETER) (BACK TWEETER) J201...
  • Page 40: Schematic Diagram - Power Section

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 6-13. SCHEMATIC DIAGRAM – POWER SECTION – IC201 LM1876TF POWER AMP C321 CN202 R321 R-CH AGND R221 C221 L-CH HP IN R327 J202 C343 R263 NC(HP MUTE) 1/2W PHONES FB341 0.001...
  • Page 41: Printed Wiring Boards - Panel Section

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-14. PRINTED WIRING BOARDS – PANEL SECTION – : Uses unleaded solder. TOP PANEL BOARD CN1271 R1277 C1275 Q1272 S1271 JL1272...
  • Page 42: Schematic Diagram - Panel Section

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 6-15. SCHEMATIC DIAGRAM – PANEL SECTION – KEY2 DGND NC(LED7) LED6 LED+7V CN1201 D1251 CN1202 SML-310LTT86 LED7 R1262 2.2k R1251 R1252 LED6 2.2k STBY-LED R1221 R1222 R1223 R1224 R1261 DGND 2.2k...
  • Page 43: Printed Wiring Board - Fl Board

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 30 for Circuit Boards Location. 6-16. PRINTED WIRING BOARD – FL BOARD – : Uses unleaded solder. FL BOARD (COMPONENT SIDE) 1-866-456- (11) 1 3 9 4 2 2 9 6 5 1 3...
  • Page 44: Schematic Diagram - Fl Board

    HCD-CZ1/NAS-CZ1 3 7 6 3 1 5 1 5 0 • See page 45 for Waveforms. 6-17. SCHEMATIC DIAGRAM – FL BOARD – C1006 C1003 C1002 C1001 R1001 C1008 100p 100p 0.01 100k 220p R1005 R1006 R1004 R1003 R1002...
  • Page 45: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 • Waveforms – CD Board – – ETHER Board – – MAIN Board – IC101 yd (LRCK) IC501 rg (XO) IC601 qg (X2) (CD PLAY mode) 4.4 Vp-p 2.4 Vp-p 2.9 Vp-p 22.8 µ s 40.1 ns...
  • Page 46: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 • IC Block Diagrams – CD Board – IC101 CXD3059AR 119 118 116 115 114 112 111 110 109 103 102 101 100 CPU INTERFACE SERVO INTERFACE 90 RMUT 89 IOVDD0 88 NC...
  • Page 47: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 IC301 TC94A34FG-002 Timing Generator VDDP PO5/AD5 /RESET PO6/AD6 STANDBY PO7AD7 /MICS /MILP MIDIO AD10 VDDT /MICK L 13942296513 /MIACK/ SRMSTB AD16 VDDT VDDM PO8/AD11 SDO0 PO9/AD12 /CCE/ PO10/ BCKO AD13 BUCK/ PO11/ LRCKO...
  • Page 48 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 IC251 BA5947FM-E2 MUTING + – INTERFACE LEVEL SHIFT INTERFACE INTERFACE VREF IC303 BH15FB1WG L 13942296513 THERMAL PROTECTION OVER CURRENT PROTECTION VOLTAGE CONTROL REFERENCE BLOCK – MAIN Board – IC602 PST3629NR IC604 NJM2870F38 (TE2)
  • Page 49 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 – ETHER Board – IC505 WM8726SEDS/R 19 18 17 16 15 CONTROL INTERFACE MUTING/ SIGMA-DELTA LOW-PASS ATTENUATOR MODULATOR CONVERTER FILTER SERIAL DIGITAL INTERFACE FILTERS MUTING/ SIGMA-DELTA LOW-PASS ATTENUATOR MODULATOR CONVERTER FILTER IC501 KSZ8721BL...
  • Page 50: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 • IC Pin Function Description ETHER BOARD IC502 ML7201TB (ETHERNET CONTROLLER) Pin No. Pin Name Pin Description PIOC0 Serial control data output to the D/A converter PIOC1 Power down signal output to the Ethernet interface...
  • Page 51: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Pin No. Pin Name Pin Description TXER_N Ethernet transmit error signal output terminal RXER_N Ethernet receive error signal input terminal VDD_CORE Power supply terminal (+3.3V) RXCLK_N Ethernet receive data transfer clock signal input terminal...
  • Page 52: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 MAIN BOARD IC601 µPD703261YGF-S06-JBT-A (SYSTEM CONTROLLER) Pin No. Pin Name Pin Description MODEL Setting terminal for model discrimination DEST Setting terminal for the destination AVREF0 Reference voltage (+3.3V) input terminal AVSS Ground terminal...
  • Page 53: Http://Www.xiaoyu163.Com

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Pin No. Pin Name Pin Description NO_USE9 Not used RDS serial data transfer clock signal input from the RDS decoder (AEP, UK models RDS_CLK only) RDS_DATA RDS serial data input from the RDS decoder (AEP, UK models only)
  • Page 54: Exploded Views

    HCD-CZ1/NAS-CZ1 SECTION 7 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are may have some difference from the original are seldom required for routine service.
  • Page 55: Front Panel Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 7-2. FRONT PANEL SECTION not supplied (TOP PANEL board) not supplied (FRONT PANEL board) not supplied SP103 not supplied not supplied supplied L 13942296513 SP102 not supplied SP202 not supplied not supplied SP203 not supplied Ref.
  • Page 56: Rear Panel Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 7-3. REAR PANEL SECTION SP101 not supplied not supplied not supplied L 13942296513 SP201 not supplied u163 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-2050-963-1 REAR PANEL ASSY SP101 1-826-072-11 LOUDSPEAKER (2.5 cm) (Rear Tweeter) (L-CH)
  • Page 57: Cd Panel Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 7-4. CD PANEL SECTION not supplied base unit (BU-K7BD81B) supplied supplied S601 L 13942296513 not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-087-053-01 +BVTP2.6 (3CR)
  • Page 58: Psamp Board Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 7-5. PSAMP BOARD SECTION not supplied MAIN board section not supplied not supplied not supplied F102 F101 not supplied (PSAMP board) L 13942296513 (US) not supplied not supplied not supplied Ref. No. Part No.
  • Page 59: Main Board Section

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 7-6. MAIN BOARD SECTION not supplied not supplied not supplied not supplied not supplied (SUBPS board) not supplied not supplied L 13942296513 not supplied not supplied not supplied (AEP, UK) Ref. No. Part No.
  • Page 60: Base Unit (Bu-K7Bd81B)

    HCD-CZ1/NAS-CZ1 3 7 63 1515 0 7-7. BASE UNIT (BU-K7BD81B) (including spindle motor (M101), sled motor (M102)) not supplied (spindle motor (M101)) not supplied (sled motor (M102)) S101 L 13942296513 Ref. No. Part No. Description Remark Ref. No. Part No.
  • Page 61: Electrical Parts List

    HCD-CZ1/NAS-CZ1 SECTION 8 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are parts list may be different from the parts are seldom required for routine service.
  • Page 62 HCD-CZ1/NAS-CZ1 ETHER 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC301 6-705-365-01 IC TC94A34FG-002 R405 1-216-809-11 METAL CHIP 1/10W IC303 6-705-807-01 IC BH15FB1WG R406 1-216-809-11 METAL CHIP 1/10W R407 1-216-809-11 METAL CHIP 1/10W <...
  • Page 63 HCD-CZ1/NAS-CZ1 ETHER 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C544 1-164-360-11 CERAMIC CHIP 0.1uF FB513 1-500-245-11 FERRITE, EMI (SMD) (2012) C545 1-164-360-11 CERAMIC CHIP 0.1uF FB515 1-500-245-11 FERRITE, EMI (SMD) (2012)
  • Page 64 HCD-CZ1/NAS-CZ1 ETHER FRONT PANEL 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R540 1-216-809-11 METAL CHIP 1/10W < FLUORESCENT INDICATOR TUBE > R541 1-216-809-11 METAL CHIP 1/10W R542 1-216-797-11 METAL CHIP...
  • Page 65 HCD-CZ1/NAS-CZ1 FRONT PANEL MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q1202 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q1203 8-729-027-43 TRANSISTOR DTC114EKA-T146 C621 1-107-826-11 CERAMIC CHIP 0.1uF Q1204 8-729-027-43 TRANSISTOR DTC114EKA-T146 C622 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 66 HCD-CZ1/NAS-CZ1 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C906 1-136-157-00 FILM 0.022uF FB750 1-216-864-11 SHORT CHIP C907 1-136-157-00 FILM 0.022uF FB751 1-216-864-11 SHORT CHIP C908 1-136-161-00 FILM 0.047uF...
  • Page 67 HCD-CZ1/NAS-CZ1 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R630 1-216-809-11 METAL CHIP 1/10W R631 1-216-809-11 METAL CHIP 1/10W R690 1-216-809-11 METAL CHIP 1/10W R691 1-216-809-11 METAL CHIP 1/10W...
  • Page 68 HCD-CZ1/NAS-CZ1 PSAMP 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark PSAMP BOARD C329 1-164-156-11 CERAMIC CHIP 0.1uF C330 1-164-156-11 CERAMIC CHIP 0.1uF ************* C331 1-165-319-11 CERAMIC CHIP 0.1uF 1-533-217-41 HOLDER, FUSE...
  • Page 69 HCD-CZ1/NAS-CZ1 PSAMP SUBPS TOP PANEL 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > SUBPS BOARD ************ 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q131 8-729-209-60 TRANSISTOR 2SB1375 < CONNECTOR > Q261...
  • Page 70 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 Ref. No. Part No. Description Remark MISCELLANEOUS ************** 1-500-386-11 FILTER, CLAMP (FERRITE CORE) 0 203 1-777-071-83 CORD, POWER (AEP, UK) 0 203 1-783-820-11 CORD, POWER (US) 1-693-669-11 TUNER PACK (TM-10CE) (AEP, UK) 1-693-672-11 TUNER PACK (TM-10U) (US)
  • Page 71 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 72 HCD-CZ1/NAS-CZ1 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

This manual is also suitable for:

Nas-cz1

Table of Contents