Entering Text - Sony Giga Juke NAS-S55HDE Operating Instructions Manual

 Character type display area
Each time you press the CHARACTER
button, the display changes as follows:
 When the input language is set to English:
Display Type of characters
a/0 Lowercase/uppercase English
letters and numbers
A/0 Uppercase/lowercase English
letters and numbers
à/0 Lowercase/uppercase English
letters (including umlaut
characters) and numbers
À/0 Uppercase/lowercase English
letters (including umlaut
characters) and numbers
0 Numbers
 When the input language is set to a
language other than English:
Display Type of characters
a/0 Lowercase/uppercase letters
(including umlaut characters)
and numbers
A/0 Uppercase/lowercase letters
(including umlaut characters)
and numbers
0 Numbers
 Text input mode (overwrite/insert)
display area
 Input bytes display area
This area shows [Number of bytes entered /
The maximum number of bytes].
The input of one character uses one byte.

Entering text

A text input display appears whenever you select
an item that requires that you enter text.
1
Press CHARACTER repeatedly to
select the desired character type.
2
Press the corresponding numeric/
text buttons to enter the desired
characters.
3
Press ENTER to input the text string.
Other operations
To Do the following:
Restore the previous Press BACK.
condition
Move the cursor Press ///.
Enter uppercase/ Press a/A, or press the
lowercase letters corresponding numeric/text
("A" or "a") button repeatedly.
Enter symbols Enter the Options menu,
(e.g., $) select [Input symbol], and
then select the desired
symbol.
Switch text input mode Enter the Options menu and
(overwrite or insert) select [Insert] or [Overwrite].
To use the same text string in another
place  Copy/Cut/Paste
1
Enter the Options menu, select [Edit]
– [Copy] or [Cut], and then press ENTER.
2
Press  /  to select the starting letter
of the text string to be copied or cut, and
then press ENTER.
3
Press  /  to select the last letter of the
text string to be copied or cut, and then
press ENTER.
If you selected [Cut], the text string is deleted
from the sentence.
4
Move the cursor to the point where you
want to paste the text string.
5
Enter the Options menu, select [Edit]
– [Paste], and then press ENTER.
The text string is inserted at that point.
The text string will be inserted without
overwriting the existing text even if the input
mode is set to "Overwrite".

GB