Setting The Clock - Sony Giga Juke NAS-S55HDE Operating Instructions Manual

Setting the clock

The time on the clock must be correctly set for the
proper operation of functions. Do the procedure
below to set the clock. The clock can also be
automatically set by connecting the unit to the
Internet (page 86).
1
Enter the Settings menu, select
[Clock setting], and then press
ENTER.
2
Select [Online auto-sync clock
setting] and press ENTER.
3
Select [Off ] and press ENTER.
4
Select the desired city from the
[Time zone] setting.
If the desired city does not appear in the
[Time zone], select a city that is within the
same time zone as the desired city.
5
Select [Standard] or [Summer time]
for the [Summer time] setting.
6
Select [Date input] and press
ENTER.
7
Press  /  to select the day/
month/year, and press  /  to
adjust the value.
The date is set in order of day, month and
year.

GB
8
Press  /  to select the hour/
minute, press  /  to set the value,
and then press ENTER.
9
Select [Apply] and press ENTER.
The time appears in [Current time].
10
Select [Close] and press ENTER.
Note
When the time setting display appears after the power
is turned on, the display automatically disappears if no
operation is performed for a while. If the time is not
set correctly, set the time correctly using the Settings
menu.
To change the date and time format
You can select an M/D/Y, D/M/Y, or Y/M/D
format for the date and a 12-hour or 24-hour
format for the time.
1
Enter the Settings menu, select [Screen
setting], and then press ENTER.
2
Select the date and time format.
When selecting the date format:
Select [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD] for the date format setting.
When selecting the time format:
Select [HH:MM] (24-hour system) or [HH:
MM AM/PM] (12-hour system) for the time
format setting.
3
Select [Execute] and press ENTER.