Display - Sony Giga Juke NAS-S55HDE Operating Instructions Manual

Hdd network audio system
Table of Contents

Advertisement

DMPORT
Use to connect the DIGITAL MEDIA PORT adapter to listen to the
playback of a digital audio player (page 58).
AUDIO IN jack
Use to connect the external audio component (page 59).
Speaker cords
Make sure the speaker cords are correctly matched with the
projections on the SPEAKER terminals, and then insert the cords
firmly into the SPEAKER terminals.
Make sure to keep the speaker away from the antennas as they may
produce noise in the radio reception.
Power cord
WARNING
Connect the power cord to a wall outlet after all other connections
have been made.
The unit turns on automatically and starts making the initial settings.
Wait until the unit turns off again.
The initial settings may take a few minutes depending on the unit's
condition.
Do not disconnect the power cord while the initial setup is in progress.
Doing so may cause the unit to malfunction.
The illustration on this page uses the models except the UK model.
AM loop antenna
Make sure to keep the AM loop antenna away
from the unit or other AV equipment as this
may produce noise in the radio reception.
1
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents