Cranage - Viessmann VITOBLOC 200 Assembly Instructions Manual

Transportation
3.3

Cranage

-
Move the cogeneration module by crane
suspended on ropes which are attached to 4
additional transport lugs.
-
It should be put into place when vertical (other
options on request).
CAUTION
Make sure that everybody leaves the
area under the module when it is
suspended on the crane hook. Maintain
the lifting equipment in good order.
NOTE
The optional transport lugs should be
screw-fitted at the sides of the base
frame (Fig. 3). Observe the minimum
frame dimensions.
CAUTION
Use suitable devices / fixtures to
prevent damage to the cogeneration
module during transportation by crane.
Do not attach the rope, pull at or
otherwise subject projecting parts to
load.
CAUTION
It should only be put into place with a
crane and ropes with a mounted sound-
absorbing hood, because it might
otherwise tip.
It is necessary to use a transport frame
when transporting and putting into
place a cogeneration module without a
sound-absorbing hood (can be hired
out against a deposit).
VITOBLOC 200 BM-366/437 Assembly instructions
Fig. 3 Moving the cogeneration module by crane and
ropes, requires four additional transport lugs
15