Megacom ® Access - NEC Neax 2000 IVS2 Manual

®
MEGACOM Access
[North America Only]
START
Assign the Trunk Restriction Class to each
CM12
station.
Set the outgoing/incoming Trunk Route
Restriction data by Trunk Restriction
Classes (RCA-RCH).
NOTE: If Call-By-Call Service Selection is required, see
programming.
END
In addition to the programming of Direct Outward Dialing, assign WATS line to the required trunk
route, as shown below:
START
Assign a WATS line to the required trunk
CM35
route.
END
2
NEAX2000 IVS ISDN System Manual
ND-70919 (E), Issue 1.0
DESCRIPTION
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
YY=01 Trunk Restriction Class
•
(1) X-XXXXXXXX: Station No.
(2) X Z
X: 1 -8: Trunk Restriction Class in Day
mode
Z: 1 -8: Trunk Restriction Class in
Night mode
1: Unrestricted (RCA)
2: Non-Restricted 1 (RCB)
3: Non-Restricted 2 (RCC)
4: Semi-Restricted 1 (RCD)
5: Semi-Restricted 2 (RCE)
6: Restricted 1 (RCF)
7: Restricted 2 (RCG)
8: Fully-Restricted (RCH)
• YY=51-58 Outgoing Trunk Restriction
• YY=61-68 Incoming Trunk Restriction
(1) 00-63: Trunk Route No.
(2) 0 : Restricted
1 : Allowed
Page 91
• YY=00
(1) 00-63: Trunk Route No.
(2) 02: WATS line
ISDN Feature Programming
DATA
for additional
DATA
Page 85