D Channel Handler Assignment - NEC Neax 2000 IVS2 Manual

D Channel Handler Assignment

START
When you use the DCH card (PN-SC01),
CM05
assign an AP number to the DCH card.
The AP number must match the SENS
switch settings on the DCH card.
When you use the PRT card, skip this
assignment.
Select DCH for ISDN-PRI.
CMAA
Assign the ISDN Protocol Type for DCH/
PRT card.
Assign the DCH number to the AP number
CM06
of DCH/PRT card assigned by CM05.
CM35
Assign the DCH number to the each B
channel trunk route assigned by CM30
YY=00.
A
2
NEAX2000 IVS ISDN System Manual
ND-70919 (E), Issue 1.0
DESCRIPTION
INITIAL
DTI INITIAL
INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING
Y=0
•
(1) 04-15, 20-31: AP No.
(2) 12: DCH card
YY=14
•
(1) 04-15, 20-31: AP No. assigned by
(2) 0 : PN-24PRTA (Built-in DCH)
1 : PN-SC01 (DCH)
YY=06
•
(1) 04-15, 20-31: AP No. of DCH/PRT card
(2) ISDN Protocol Type
17 : Australia
18 : New Zealand
19 : ITU-T (Hong Kong)
20 : AT&T (#4, #5 ESS)
21 : NTI (DMS 100, 250)
22 : Australia ETSI
23 : ETSI VN4 (Chile)
24 : ETSI Standard (Brazil, Chile,
Columbia)
25 : ITU-T Standard (Thailand)
28 : USA NI-2
63 : Not used
YY=08
•
(1) 0-7: DCH No.
(2) 04-15, 20-31: AP No. of DCH/PRT card
YY=93
•
Assignment of D Channel Handler
(1) 00-63: B channel Trunk Route No.
(2) 00-07: DCH No. assigned by CM06
ISDN-PRI Programming
DATA
CM05
assigned by CM05
assigned by CM05
Page 73