Codes Coding Levels; Call Up "Extended Settings; Overview "Extended Settings - Viessmann Vitotrol 350 Installation And Service Instructions Manual

Codes
Coding levels
Not all menus are available at every setting level to
avoid incorrect operation of the remote control and
other system components.
The system user can make adjustments in the stand-
ard menu. The "Extended settings" level is intended
for heating contractors and is password protected.
Additional functions are available on this level. Here,
control parameters can be corrected for example.

Call up "Extended settings"

1. "Menu"
2. "Settings"
3. "Extended settings"
4. Tap on field "ABC" or "123" in order to change to
the keyboard required.

Overview "Extended settings"

Extended settings
Configuration Settings
CAN modules Default display
Settings Actuator test
General
Fig. 22 Page 1
Possible settings
"Configuration of CAN modules"
"Default display settings"
"Configuration of regulated circuits"
"General settings"
"Actuator test"
"Change password"
"Boiler settings"
"Fuel settings"
"Controller settings"
"Buffer cylinder settings"
16
For "Extended settings":
See from page 16
5. Enter password "1234".
6. Press "OK" to confirm
Extended settings
Configuration
Regulated circuits
Password
change
Fig. 23
Description
From page 12
From page 14
From page 13
From page 17
From page 17
From page 18
From page 18
From page 18
From page 18
From page 18
For main operating functions and displays:
Vitotrol 350 operating instructions
Note
Password "1234" is set as default for the Vitotrol
350. Change password, see page 18.
The "Extended settings" overview is displayed.
Settings Settings
Boiler Fuel
Settings
Buffer cylinder
Page 2
Settings
Controller