Preparing for installation
Installation location
!
Please note
The Vitotrol 350 can be damaged by ingress of
moisture or water.
Install the Vitotrol 350 exclusively in dry areas.
Avoid installation outdoors or in wet rooms.
Fig. 1
■
Weather-compensated operation
Installation in any room
■
Operation with room temperature hook-up
–
On an internal wall in the main living room, approx.
1.5 m above the floor
Not near windows or doors
–
–
Not above radiators
–
Not near heat sources (direct sunlight, fireplace,
TV set, etc.)
Do not install additional control devices in this room. If
radiators are equipped with thermostatic valves, these
must always be fully opened.
500
Preparing for installation
7