Installing The Network Interface Board - Canon N 1000 Setup Manual

Installing the Network Interface Board

Follow the procedure below to install the Network Interface Board NB-11FB
for the N1000/2000.
Important
Before you begin the procedure below, touch a metal surface to discharge any
electrostatic charge from your hands.
While performing the procedure below, do not touch a monitor or any other type of
electronic device that could produce an electrostatic charge.
Note
Some network models of this printer are equipped with a network interface board
and do not require this installation procedure described below.
1
Press the Power button to switch the printer off.
2
Disconnect the power cable and all interface cables.
Installing the Network Interface Board
2-7