Canon N 1000 Setup Manual page 81

15
Repeat Step 13 and Step 14 to enter the complete IP address.
16
After entering the IP address, press
"Subnet Mask", then press
I P S e t t i n g
S u b n e t M a s k
17
Press or select the digit to set then press
S u b n e t M a s k
= 0 . 0 . 0 . 0
The underscore (_) indicates the digit selected to change.
18
Press or to enter the subnet mask in use then press
: Press to increase the number one by one.
: Press to decrease the number one by one. The number after 0 is 255.
S u b n e t M a s k
= 2 5 5 . 0 . 0 . 0
The subnet mask value is set.
19
Repeat Step 17 and Step 18 to enter the subnet mask in use.
20
After entering the subnet mask, press
"Default G/W", then press
I P S e t t i n g
D e f a u l t G / W
, press
.
→ → → →
, press
.
→ → → →
13 Perform the Printer Network Information Settings
or to select
.
.
or to select
1-69