Canon N 1000 Setup Manual page 82

21
22
23
24
25
1-70
Setting Up the Printer
Press or to select the digit of the router IP address then press
D e f a u l t G / W
= 0 . 0 . 0 . 0
The underscore (_) indicates the digit selected to change.
Press or to enter the router IP address then press
D e f a u l t G / W
= 1 9 2 . 0 . 0 . 0
: Press to increase the number one by one.
: Press to decrease the number one by one. The number after 0 is 255.
D e f a u l t G / W
= 1 9 2 . 0 . 0 . 0
The default value for the gateway is displayed.
Repeat Step 21 and Step 22 to enter the complete router IP address.
After entering the router IP address, press
to select "Regis. Settings", then press
E x t . N e t w o r k
R e g i s . S e t t i n g s → → → →
Press .
R e g i s . S e t t i n g s
E x e c u t e ?
When "Registered!" is displayed, this completes the settings.
If an error is displayed, repeat the procedure to check each entry then correct
the settings.
.
three times, press
.
.
or