Canon N 1000 Setup Manual page 34

Important
1-22
Setting Up the Printer
7
After all ink tanks have been installed, close the right cover.
Press down gently on the right cover until you hear it click and lock.
After successful installation of the printhead and the ink tanks, "Ink
Filling..." is displayed on the operation panel and the ink automatically
starts flowing.
If all the ink tanks are not installed, the right cover opens automatically. Make sure
that all of the colored ink tanks are installed.
After performing the "Move Printer" selection on the operation panel to prepare
the printer for moving or shipment, even after the ink tanks are installed again, the
initial ink filling will not execute automatically. After installing the ink tanks, press
the Online button to set the printer offline, then execute "Head Cleaning C" with
the printer operation panel. ( User's Guide, Chapter 6, "Cleaning the Printhead")
8
When you see "Ready" displayed on the operation panel, press the
Online button to light the Online lamp.