Canon N 1000 Setup Manual page 46

1-34
Setting Up the Printer
4
Press or to display "Interface Type" and press
S e t I n t e r f a c e
I n t e r f a c e T y p e → → → →
5
Press or to display the setting for the interface connection and
press .
I n t e r f a c e T y p e
U S B
An equals sign (=) to the left of a setting indicates the current port selection.
6
When you are finished, hold down the Power button for over two
seconds and release it to switch the printer off.
7
Wait for a few seconds then press the Power button to switch the
printer on.
After a few seconds "Ready" is displayed in the operation panel and the
Online lamp lights. The printer is now ready for operation through the
selected interface port.
→ → → →
.