Network Connection - Canon N 1000 Setup Manual

Network Connection

Note
1-12
Setting Up the Printer
The computer can be connected via its LAN port to a network using
10BASE-T/100BASE-TX protocols. For a network connect, the printer
LAN port is connected to the network HUB. The optional Network Interface
Board NB-11FB must be installed in the standard model of this printer
before the printer can be connected to a network. (
1
Press on the lever to remove the connector cover on the back of the
printer.
Store the connector cover in a safe place. The connector cover must be re-attached
after the LAN cable is disconnected or before moving the printer.
2
Connect the LAN cable to the LAN port.
Press in until you hear a click.
P.2-7)