Printhead Correction Settings - Canon N 1000 Setup Manual

Printhead Correction Settings

Note
1-56
Setting Up the Printer
After the software has been installed, use the printer driver to perform the
original correction settings for the installed printhead. Perform this
procedure for all computers where the printer driver has been installed.
The printhead correction settings are performed in the Printer Properties
window with the printer icon selected.
The steps below describe the procedure for Windows 98.
If the computer is on, switch the computer off before you start this
procedure.
1
Press the Power button to switch the printer on.
After a few seconds "Ready" is displayed in the operation panel and the
Online lamp lights.
2
Switch the Windows computer on.