High/Low Beam Switch; Automatic High Beam - If Equipped - Jeep Wrangler 2020 Owner's Manual

High/Low Beam Switch

Push the multifunction lever toward the instrument panel to
switch the headlights to high beams. The lever will return to
the centered position. To return the headlights to low beam,
pull the lever toward the steering wheel, or push the lever
toward the instrument panel.
Multifunction Lever
GETTING TO KNOW YOUR VEHICLE
Automatic High Beam — If Equipped
The Automatic High Beam Headlamp Control system
provides increased forward lighting at night by automating
high beam control through the use of a digital camera
mounted on the vehicle's header. This camera detects vehicle
specific light and automatically switches from high beams to
low beams until the approaching vehicle is out of view.
NOTE:
• The Automatic High Beam Headlamp Control can be turned
on or off by selecting "ON" under "Auto High Beam" within
your Uconnect settings, as well as turning the headlight
switch to the AUTO position and placing the multifunction
lever in the high beam position. Refer to "Uconnect Settings"
in "Multimedia" for further information.
• Broken, muddy, or obstructed headlights and taillights of
vehicles in the field of view will cause headlights to remain
on longer (closer to the vehicle). Also, dirt, film, and other
obstructions on the windshield or camera lens will cause
the system to function improperly.
69
2