Jeep Wrangler 2020 Owner's Manual page 442

440 IN CASE OF EMERGENCY
3. Firmly grasp the bulb by the two latch features and
squeeze them together to unlock the bulb from the back
of the front fog lamp housing.
4. Pull the bulb straight out from the keyed opening in the
housing and then connect the replacement bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the bulb
comes in contact with any oily surface, clean the bulb
with rubbing alcohol.
LED Front Fog Lamp
If your vehicle is equipped with LED fog lamps they are
replaced as an assembly.
Rear Tail, Stop, Turn Signal, And Backup Lamp
1. Remove interior trim panel cap to access single retaining
screw for tail lamp assembly.
Trim Cap