Jeep Wrangler 2020 Owner's Manual page 383

Distance Setting 1 Bar (Short)
To increase the distance setting, push the Distance Setting —
Increase button and release. Each time the button is pushed,
the distance setting increases by one bar (longer).
To decrease the distance setting, push the Distance Setting —
Decrease button and release. Each time the button is pushed,
the distance setting decreases by one bar (shorter).
If there is no vehicle ahead, the vehicle will maintain the set
speed. If a slower moving vehicle is detected in the same
lane, the instrument cluster displays the "Sensed Vehicle
Indicator" icon, and the system adjusts vehicle speed auto-
matically to maintain the distance setting, regardless of the
set speed.
The vehicle will then maintain the set distance until:
• The vehicle ahead accelerates to a speed above the set
speed
• The vehicle ahead moves out of your lane or view of the
sensor
• The distance setting is changed
• The system disengages (Refer to the information on ACC
Activation)
The maximum braking applied by ACC is limited; however,
the driver can always apply the brakes manually, if neces-
sary.
NOTE:
The brake lights will illuminate whenever the ACC system
applies the brakes.
STARTING AND OPERATING 381
5