Jeep Wrangler 2020 Owner's Manual page 199

The power inverter is designed with built-in overload
protection. If the power rating of 150 Watts is exceeded, the
power inverter automatically shuts down. Once the electrical
device has been removed from the outlet, the inverter should
automatically reset. If the power rating exceeds approxi-
mately 170 Watts, the power inverter may have to be reset
manually.
WARNING!
To avoid serious injury or death:
• Do not insert any objects into the receptacles.
• Do not touch with wet hands.
• Close the lid when not in use.
• If this outlet is mishandled, it may cause an electric
shock and failure.
GETTING TO KNOW YOUR VEHICLE
Auxiliary Switches — If Equipped
Four auxiliary switches located in the lower switch bank of
the instrument panel can be used to power various electrical
devices. You have the ability to configure the functionality of
the auxiliary switches via the Uconnect settings.
All switches can be configured as follows:
• Switch type operation: Latching or Momentary
• Power source: Battery or Ignition
• Ability to hold last state across key cycles: On or Off
Auxiliary Switches
197
2