Off-Road Driving Tips
Side Step Removal — If Equipped
NOTE:
Prior to off-road usage, the side steps should be removed to
prevent damage if so equipped.
1. Remove both nuts and bolt from the underside of the
vehicle for each bracket.
Underside Nuts
2. Remove the side step assembly.
Bumper End Cap Removal
The end caps on your vehicle's front bumper can be removed
by following the steps below:
NOTE:
Bumper end caps are removable on steel bumper only.
1. Loosen the two bolts that retain the GAWR bracket (Bolts
#1 and #2) to the end cap using a T45 torx bit screw
driver. Do not remove the bolts.
Bolt #1
STARTING AND OPERATING
419
5