Jeep Wrangler 2020 Owner's Manual page 574

572 MULTIMEDIA
Audio
After pressing the Audio button on the touchscreen, the following settings will be available:
Setting Name
Equalizer
NOTE:
When in this display, you may adjust the "Bass", "Mid", and "Treble" settings. Adjust the settings with the + and – setting
buttons or by selecting any point on the scale between the + and – buttons. Bass/Mid/Treble also allow you to simply slide
your finger up or down to change the setting as well as press directly on the desired setting.
Balance/Fade
NOTE:
When in this display, you may adjust the "Balance/Fade" of the audio by using the Arrow button on the touchscreen to
adjust the sound level from the front and rear or right and left side speakers. Press the Center C Button on the touchscreen
to reset the balance and fade to the factory setting.
Speed Adjusted Volume
NOTE:
When in this display, you may adjust the Uconnect system's ability to increase audio volume to compensate for increased
speeds and road noise. Select the desired setting from Off to 3 to increase the audio volume as speeds increase.
Surround Sound — If Equipped
Loudness
Bass
Up Arrow Down Arrow
Button Button
Off
On
On
Selectable Options
Mid
Left Arrow Right Arrow
Button Button
1 2
Off
Off
Treble Levels
Center C
Button
3