Lcd Section Of The Data Edit Screen - JUKI AMS-210ENHL2210/TF10S Instruction Manual

(2) LCD section of the data edit screen

Button name
BAR-CODE RECORD NEW
REGISTRATION button
BAR-CODE RECORD
COPY button
CODE NAME EDIT button
CLOSE button
BAR-CODE RECORD
SELECTION button
TAPE WIDTH SETTING
button
NUMBER OF TAPE-IN-USE
SETTING button
B-IN REGISTRATION button The number of pattern registered for B-IN is displayed. When this button is
The bar-code record registration screen is displayed.
→Refer to "II-3-4. (3) New registration of a bar-code record" p.43.
The bar-code record copy screen is displayed.
→Refer to "II-3-4. (7) Copy of the bar-code record" p.54.
The code name edit screen is displayed.
→Refer to "II-3-4. (6) Editing the code name" p.53.
The data edit screen is closed.
The bar-code record selection screen is displayed.
The tape width is displayed. When this button is pressed, the parameter change
screen is displayed.
→Refer to "II-3-4. (5) Editing parameters" p.46.
The number of tape used is displayed. When this button is pressed, the parameter
change screen is displayed.
→Refer to "II-3-4. (5) Editing parameters" p.46.
pressed, the pattern list screen is displayed.
→Refer to "II-3-4. (4) Registration of patterns corresponding to the B-IN, A-IN,
B-OUT and A-OUT" p.45.
– 41 –
Description