Operation Buttons On The Lcd Screen - JUKI AKANE MO-3000QVP Instruction Manual

Operation buttons on the LCD screen

❶
Button name
Chain-off thread cutting
❶
button
Edit button
❷
Stitch display button
❸
Automatic chain-off thread
❹
cutting changeover button
❺
Enter button
❻
Left button
❼
Right button
* The buttons are disabled while the sewing machine is in operation.
LCD screen display
①
/ / /
②
③
7
LCD screen
Use this button to manually cut the chain-off thread.
* Chain-off thread is stitch-formed thread with no material.
Displays the data edit screen.
With this button, the "maximum sewing speed", "automatic chain-off thread cutting length",
"hand LED illumination", "hand LED color temperature", "LCD contrast", "Machine operation
when operating the foot switch" and "display language" can be edited.
Displays the stitch display screen.
Four different types of stitches are available: "A: 2-needle 4-thread", "B: 1-needle
3-thread", "C: Narrow overlocking" and "D: Rolled hemming".
Changes over ON/OFF of the automatic chain-off thread cutting.
When this button is placed in ON, the material end is detected at the end of sewing and
chain-off thread is automatically cut to the set length.
Confirms the content you have edited.
Moves the selection bar on the LCD screen to the left.
Moves the selection bar on the LCD screen to the right.
Display contents
Displays the stitch.
Displays the stitch length.
Displays the differential feed ratio.
Stitch changeover
Stitch length adjustment
❷ ❸ ❹
❻ ❼
Differential feed adjustment
Function
Change over the stitch with the stitch changeover
knob.
Adjust the stitch length by turning the stitch adjust-
ment dial .
Adjust the differential feed amount by turning the
differential feed adjustment dial.
Stitch
changeover
knob
❺
Stitch length
adjustment
dial
Differential
feed adjust-
ment dial