JUKI AMS-210ENHL2210/TF10S Instruction Manual page 92

③ Change of counter set value
Press button
for the bobbin counter to display the corresponding
counter set value input screen.
Here, input the set value.
When "0" is inputted in the set value, the display of count-up
screen is not performed.
④ Change of counter existing value
Press button
ton for the bobbin counter to display the correspond-
ing counter current value input screen.
Here, input the existing value.
– 79 –
for the sewing counter, counter of button
for the sewing counter, counter of but-