JUKI AMS-210ENHL2210/TF10S Instruction Manual page 78

Tape detail setting items
Symbol Pictograph
C011 Tape feeding
motor resolution
C017 Feeding speed
at the beginning
of sewing
C018 Feeding amount
at the beginning
of sewing
C019 Feeding pitch at
the beginning of
sewing
C020 Number of
stitches for
feeding tape
C021 Guide extension
value
C022 Tape sewing
width correction
*1 In the initial state, C011 is hidden. It is displayed only when the K554 (tape feeding motor resolution
setting display mode) which is categorized under the level 2 of the memory switch is set to "display".
Refer to the Engineer's manual for how to set the items categorized under the level 2 of the memory
switch.
Item Description
Fine adjustment of the tape
feeding amount can be carried
out. *1
The tape feeding speed at the
beginning of sewing is changed.
The tape feeding amount can
be changed.
The tape feeding pitch can be
set while the number of stitches
for feeding the tape (C020) is
sewn.
The number of stitches to be
sewn with the feeding pitch at
the beginning of sewing (C019)
can be set.
The guide width extension
amount excluding the time
when the tape is fed
(When external output 1 is in
the OFF state, the guide width
is extended.)
The distance from the tape
edge to the seam can be
corrected according to the tape
width.
– 65 –
Unit of
Data range
edit
210 to 1
840
1000 to 100
8000
0 to 15.0 0.1mm
0 to 15.0 0.1mm
0 to 10
1 stitch
0.0 to 2.0 0.1mm
–2.0 to 2.0 0.1
Initial
value
400
4000
5.5
2.0
2
0.5
0.0